Prefinished Blackwood Panels 19mm

Why Choose Prefinished Blackwood Panels

Our prefinished Blackwood panels bring one of Australia's most treasured cabinet timbers to your project with zero on-site finishing required. Each 19mm panel features genuine 0.5mm Blackwood veneer on both faces, factory-sealed under a hard-wearing UV Polyacrylate coating at ≤5% sheen. The natural finish showcases Blackwood's lustrous golden-brown tones, occasional darker streaks and flowing grain, a warm, sophisticated look long favoured by Australian furniture makers and now ready for modern joinery straight off the panel saw.

Because the finish is UV-cured in controlled factory conditions, prefinished Blackwood panels skip the sanding, staining and lacquering that raw veneer boards demand. That means faster installs, cleaner job sites, consistent finish quality across every sheet, and significant labour savings on every project.

Crown Cut Grain with Heirloom Character

These panels are produced using a crown cut, slicing the log parallel to its centre to reveal Blackwood's flowing cathedral grain and natural lustre. The veneer leaves are laid in a mismatched/random match arrangement, giving each panel an organic, natural appearance rather than a repeating mirrored pattern. This layout suits designers seeking an authentic timber look, and it makes joining multiple panels across large wall or joinery runs far more forgiving.

Choice of Substrate: 18mm FOSB or 18mm MR MDF

Choose the core that suits your application:

• 18mm MR MDF: Moisture-resistant MDF is the go-to for kitchen cabinetry, bathroom vanities and laundry joinery. Its dense, uniform core machines cleanly, holds crisp edges and provides a stable base for hardware.
• 18mm FOSB (Fine Oriented Strand Board): FOSB offers excellent screw-holding strength and dimensional stability, well suited to structural joinery, shelving and commercial fit-outs. Both board types are manufactured to recognised engineered wood standards (EWPAA).

Both substrates are pressed with 0.5mm veneer to each side for balanced construction, helping the panel stay flat over time.

DGB Backing Option

Our prefinished Blackwood panels are available with a DGB (Downgraded Back), where the reverse face carries a lower-grade Blackwood veneer. For cabinetry carcasses, wall panelling and any application where only one face is visible, DGB delivers the same premium show face at a more economical price point, without compromising the balanced construction that keeps the panel stable.

Ultra-Matt Natural Finish

The ≤5% matt UV Polyacrylate finish is one of the lowest sheen levels available in prefinished board, giving the veneer a raw, just-sanded timber look that resists fingerprints and glare. On Blackwood, this natural-look coating preserves the timber's characteristic golden glow and depth without the plastic sheen of traditional lacquers. The UV-cured surface is tough, scratch-resistant and stands up to household chemicals and everyday wear, ideal for doors, drawer fronts and feature walls.

Prefinished Blackwood Panels: Applications

• Kitchen and bathroom cabinetry
• Wardrobes and built-in storage
• Wall and ceiling panelling
• Commercial fit-outs and shopfitting
• Furniture, shelving and desking
• Reception counters and feature joinery

Exploring Australian timbers? Compare the blonde tones of Prefinished Tasmanian Oak Panels 19mm and the rich browns of Spotted Gum, see imported favourites like American Walnut, or browse the full range of prefinished veneer panels.

Why Buy from iWood

iWood supplies premium veneered board products to cabinetmakers, joiners, builders and designers across Australia. Every order of prefinished Blackwood panels is quality-checked before dispatch and delivered ready to cut, edge and install. If you need help choosing between FOSB and MR MDF, or want a sample before ordering, contact our team and we'll be happy to assist.